AA710KIT – MUIR

$599.00

Features

  • Larger LCD with improved contrast
  • 2 additional outputs in the base station allow for more installation options – A single kit can be used for 1 windlass plus a bow and stern thruster
  • Antenna plug is standard on the base station
  • Automatic sensor detection – no need to select sensor in the set up
  • Manual control alarm and stop at docking distance – stops the windlass during retrieval when using manual and automatic operations
  • Swap controls option in set up – this option means the ‘Up’ button can be used as ‘Out’ and the ‘Down’ button can be used as ‘In’
  • Drum windlass counting capability
  • Improved troubleshooting – Simplified diagnostics and built in voltmeter with expanded technician diagnostics
  • Time out connection between the base station and the console now adjustable up to 20 minutes
  • Dual speed windlass capability
  • Options for windlass related actions, using the left and right arrow buttons, no longer limited to anchorwash and anchorlight. Can now be user selected and could include a windlass stow, power cleats, deck wash, deck light
  • Power enable option now available with off delay for hydraulic, AC, DC and PLC installations

 

 

Plus

  • Full windlass control and chain counting
  • Controls bow and stern thrusters independently and together
  • Preset the length of rode to deploy
  • Auto stop and docking alarm when the anchor is close to docking
  • Counts rope/chain or all-chain rode
  • Logs windlass operating hours for maintenance
  • Easy installation and set up
  • Plug and play sensor installation
  • Console unit is shockproof, waterproof and will float
  • High level wireless transmission security includes unique ID and registration for every unit
  • Safety lock reduces unwanted operation
  • Ergonomic shape with lanyard connector
  • Console holder and protective cover
  • Displays signal strength and battery level
  • Use with DC, AC and hydraulic windlasses
  • Antenna available if wireless communication is impeded
  • Operates in parallel with other control equipment eg toggle switches, foot switches and other electronic controllers
Category:

A wireless remote control for full windlass control and chain counting with the option of thruster operation.

Function Options

A system with one base station (6 outputs) can operate:

  • 1 windlass plus a deck wash and deck light or other auxiliary functions
    or
    1 windlass and 1 or 2 thrusters

 

Technical Specification

     AA710 Remote Control

Power Supply 2 x AA1.5V Batteries
Current N/A
Output Current Draw N/A
IP Rating IP67
Operating Temperature Range 23°F to 140°F (-5°C to 60°C)
Wireless Transmission 2.4GHz ISM Band, IEEE 802.15.4 Compliant, 64 Bit Unique ID
Wireless Range Typical Minimum 10m (30ft). Range depends on installation
RF Compliance EN 300 440/328 FCC-CFR-47 Part 15
EMC Compliance CE EN60945

 

     AA710 Base Station

Power Supply 12/24V DC
Current 50mA
Output Current Draw 12V DC: 3.5A min/10mA max
24V DC: 3.5A min/20mA max
IP Rating IP67
Operating Temperature Range 23°F to 140°F (-5°C to 60°C)
Wireless Transmission 2.4GHz ISM Band, IEEE 802.15.4 Compliant, 64 Bit Unique ID
Wireless Range Typical Minimum 10m (30ft). Range depends on installation
RF Compliance EN 300 440/328 FCC-CFR-47 Part 15
EMC Compliance CE EN60945